Table of contents
Summary
LABOR PARTNER LP-AZUR is a Blue toner for use with processed black & white photos and films.
The use of LP-AZUR will cause metal salts to accumulate at metallic image silver in proportion to the density.
| Note: |
For customers who do not have experience in handling photographic chemistry
and for first time users, it is especially important to pay attention to the safety notes, for thoes who have toning experience it is equally important to work with the instructions. |
Please read carefully the safety notes in chapter 3.
LP-AZUR is a single bath toner, which will not emitt annoying or harmful vapors when working according to the instructions.
For best results it is recommeded to use „too light" photos and negatives (practically start with 0,5 - 1 f stop underexposure), since the blue toner will add to the existing density . Within limits, the time of immersion accounts for density of the achievable blue tone.
One of the reasons to tone black & white prints with LP-AZUR is the variety of possible results. The special look of a blue toned photo raises the visual quality above the average.
| Note: |
The blue toning of MACO expo Ag is of particular interest - due
to the silvermetallic base coating one will receive unique image results. |
For your own safety, please follow the instructions:
Disposal: According to local regulations.
Mixing takes place at room temperature. You can tone directly after mixing.
Preferably mix only as much LP-AZUR as directly needed.
| Mixing | |
Dilute 1 part |
concentrate A |
and 1 part |
concentrate B |
with 8 parts |
tab water. |
Toning
Dry as well as wet photos and films can be toned.
Immersion time: 1-3 minutes, depending on wanted degree of toning.
The toning takes place in a well lit room. Preferably you tone each print individually, emulsion side up with constant agitation. After having finished toning let excess liquid run off the print and immerse it into the final wash.
To produce blue slides by using MACO ORT25, orthochromatic Black & White film:
Expose your text or graphics, black onto white ground, in such a way, that the white background will show a medium density. The concentrates are diluted with tab water. Dilutions for part A and part B are the same:
| Toning variable contrast papers: | Dilution 1 + 5 or 1 + 7 |
| 1. Immersion time in bath A (Bleach) : | 10 - 60 sec. |
| 2. Washing at 20°C/68°F : |
5 -10 minutes (Bleach has to be washed out completely) |
| 3. Immersion time in bath B (Toner) : | 60 sec. |
| Toning graded papers: | Dilution 1 + 7 bis 1 + 9 |
| 1. Immersion time in bath A (Bleach) : | 10 - 60 sec. |
| 2. Washing at 20°C / 68° F : |
5 -10 minutes (Bleach has to be washed out completely) |
| 3. Immersion time in bath B (Toner) : | 60 sec. |
Note about change of image tone:
LP-SEPIA will cause different toning results with different photographic emulsions. In order to learn the actual change of image tone, we recommend to start toning with well washed spare prints.
Chlorobromide papers such as MACO expo RF or expo RN will show a warmbrown image tone.
Pure bromide papers such as MACO expo G will show a coldbrown image tone.
| Hint: |
The use of the Lazarus-Toning-Procedure, in short LTP*, makes it possible to achieve photos with a slight brown image tone without having fully brown toned photos: |
| Dilute part A (bleach) 1 + 100, immersion time 2-4 minutes, then wash thoroughly , immerse into bath B (toner) which you have diluted 1 + 50 for about 2-4 minutes. This is followed by the final wash. | |
| In order to control the degree of toning visually it is recommended to place an untoned photo of equal denisty into a tray filled with water . |
* LTP has been worked out in a Black & White professional Lab in Hamburg, „LAZARUS FINE PRINTS" based on LABOR PARTNER LP-SEPIA .
For Informations about the final wash, please read the following
instructions.
After toning, prints have to be washed thoroughly.
Preferably use the last chambers of the especially well suited MACO ecowash
printwashers.
Advantage of the ecowash is a short and thorough washing while saving water
in comparison to conventional washing methods.
Moreover, one avoids the risks of washing out optical brighteners or damaging the structure of the paper, which may happen due to long washing times.
| Washing times (20°C/68 F) | |
| With MACO ecowash | |
| PE/RC/ - photographic paper | 5 Minutes |
| Baryta/FB - photographic paper (double/premium weight) | 18 Minutes |
| Conventional washing methods | |
| PE/RC/ - photographic paper | approx. 10 Minutes |
| Baryta/FB - photographic paper (double/premium weight) | approx. 60 Minutes |
Shelf life:
LP-SEPIA part A has a shelf life of 3-5 years and part B 1-2 years in unopened original bottles.
Working solutions, if kept in glass bottles can be used for about 3 months depending on degree of useage.
Yield:
Depending on degree of toning and type and weight of paper one can tone per 1000 cc working solution:
ca. 30 photos 24 x 30 cms (9,5x12")
LP-SELENIA is available as a liquid concentrate, 2 x 250cc for up to 2,5 liters working solution, article LPH52, and
for professional use 2 x 1000cc for up to 10 liters, article LPH51.
| Note: |
The black 1000 cc bottles have an additional safety ring around the cap.
Please take it off before unscrewing. |
LP-SEPIA in the original bottle should be stored at room temperature.
(Temperature range min. 5°C - max. 30°C)
For all MACO Products, of which some have been mentioned here, you can receive technical application sheets by sending a sufficiently stamped addressed envelope.
TA SEPIA TA-Nr. 222/2 April 1998
Errors, or omissions regarding technical progress remain excepted.